V3 one last Tweak

I decided to make one last improvemnt on the V3 before starting on the first order.  In the picture you can see the black line drawn inside the wheel well. 

I will change the shape of the mould so the  line is now the outside of the shape.  This will reduce the area exposed to airflow behind the wheel a bit. 

Here you can see the mould cut away waiting for the new shape to be inserted.  Once the new shape is held in place I will rebuild the mould over it.  Then comes the tricky part of matching it to the existing mould.  Mostly its a lot of tedious delicate sanding.